Stainless Steel Tubes

Stainless Steel Welded Tubes

We are offering stainless steel welded tubes in Polished or pickled. These welded stainless steel tubes are available in plain and bevelled type with or without caps on ends in standards like ASTM A249, A269, A554, etc.

• Sizes : 1/2" OD to 12" OD
• Wall Thickness : 0.4mm - 8mm
• Grade : 201, 202, 304, 304H, 304L, 309, 310, 316, 316L, 321, etc
• Specifications : ASTM A249, A269, A554, etc.

Stainless Steel Seamless Tubes

Our stainless steel seamless tubes are widely used in engineering and construction industry, etc. These seamless stainless steel tubes are available in sizes from OD 6.35mm x WT - OD 159 x WT 0.5 - 12.7mm.

• Sizes : 1/4" OD to 8" OD
• Wall Thickness : 0.4mm - 12.7mm
• Grade : 201, 202, 304, 304H, 304L, 309, 310, 316, 316L, 321, etc.
• Specifications : ASTM A213, A269, etc.

Stainless Steel Capillary Tubes

GGS quality stainless steel capillary tubes offer a combination of desired characteristics :

• Dimensional accuracy
• Clean and smooth surface quality
• High corrosion and heat resistance
• Excellent tensile properties
• Good machinability
• Superior concentricity of OD and ID
• Better ID surface quality
• Availability in a larger range of sizes and wall thicknesses
• Lower costs and shorter delivery times

• Sizes : 1mm OD to 10mm OD
• Wall Thickness (SWG) : 0.03 to 1.0mm
• Grade : 304, 304L, 316, 316L
• Specifications : Seamless & Welded

Stainless Steel ERW Tubes

We are offering stainless steel ERW tubes in Polished or Pickled. These stainless steel ERW tubes are available in plain and bevelled type with or without caps on ends in standards like ASTM A249, A269, A554, etc.

• Sizes : 1/2" OD to 12" OD
• Wall Thickness (SWG) : 0.4mm - 8mm
• Grade : 201, 202, 304, 304H, 304L, 309, 310, 316, 316L, 321, etc.
• Specifications : ASTM A249, A269, A554, etc.

EFW Tubes

The Large Diameter Stainless Steel EFW Tubes manufactured in this Division, finds application for Oil and Gas Exploration, Refineries & Petrochemicals, fertilizer, LNG Terminals, Cross Country Pipe Line for Gas & Water and Pipes for General Engineering Purpose.

• Sizes :1/2" OD to 12" OD
• Wall Thickness (SWG) : 2.5mm - 16mm
• Grade : 201, 202, 304, 304H, 304L, 309, 310, 316, 316L, 321, etc.
• Specifications : ASTM A-358, A-409, A-778, A-928

Stainless Steel Hollow Bushing

Stainless Steel Hollow Bushing / Hollow Bar is normally produced on an extrusion press by the same method as hot extruded seamless Pipe and tube.

We offer our clients with stainless steel hollow bars and hollow bushings which are hot finished, fully softened and descaled. These stainless steel hollow bars and hollow bushings are available in various sizes of 32mm OD - 250mm OD & INSIDE DIAMETER as per the requirements of the clients.

• Sizes : 32mm OD - 250mm OD & INSIDE DIAMETER as available
• Grade : 201, 202, 304, 304H, 304L, 309, 310, 316, 316L, 321, etc.